Garages get a considerable measure of utilization and are regularly a four-season work space augmentation of the house, so keeping the garage as agreeable as could reasonably be expected amid the winter is an unquestionable requirement. Fortunately, you can buy garage door winterizing units from most equipment and home change stores. Since these packs are basic and simple to use, there is a decent risk your door as of now has climate stripping. Just evacuate the old material and tack on the new stuff.
Here are some of the basic things you will need

• Climate stripping/winterizing pack for garage doors • Utility blade • Locking pincers or 2-by-4 • Hammer • Pry bar • Measuring tape • Paint

  • Open the door to a helpful working stature and join locking pincers to the track, or prop it open with a 2-by-4.
  • Evacuate the old climate stripping, if any. The old stuff is nailed to the door, so embed the tip of a level pry bar between the old strip and the door and delicately tap on it with a sledge. Fare thee well not to harm the door by hitting too hard.
  • Cut a length of climate stripping that matches the width of the door and nail it set up. Open and close the door two or three times to test it out.
  • Close the garage door. Measure pieces for every side and the highest point of the garage door outline. Incline the plastic by cutting the pieces in favour of the edge at a 45-degree edge where they meet the top strip, then nail them set up.
  • Open and close the door to ensure the stripping doesn’t meddle with the door’s operation.
  • Paint the climate stripping to coordinate the garage door outline.
  • Also, as part of maintaining your garage for different weather seasons, you need to know how to prevent garage door lock from freezing. Disregard winter wonderland. At the point when winter strikes, it implies scratching ice off windshields and driving through blowing snow and on frigid streets, or freezing while you sit tight for the defroster and radiator to work. What you never expect is that your lock will solidify you out of your vehicle. Yet this happens each year to individuals living in freezing temperatures. Take after these progressions to keep a lock from freezing.
  • Make companions with a lock grease like WD-40. Splash generously on all door and trunk locks before the climate solidifies. Utilize the minimal straw that accompanies these jars to shower the oil in your keyholes. On the off chance that confronted with a long winter, you might need to reapply WD-40 later in the season.
  • Attempt graphite on locks on the off chance that you can’t endure the scent of WD-40. Graphite can keep secures working request when little dampness is noticeable all around.
  • Store deicer where it’s effectively open. A portion of the issue with purchasing deicer is that individuals keep it inside autos where it benefits no on solidified locks. Keep a little container of deicer in your satchel, house or work area drawer at work.
  • Keep dampness out of keyholes. A few individuals speculate that it’s the freezing dampness inside the keyhole that causes the issue. Have a go at covering the keyhole with putty when the auto sits outdoors. Remove the putty when you have to open your door.
  • Heat the end of a key with a match or lighter, and after that embed it in the lock.
  • Abstain from pouring boiling hot water on your lock, every one of the experts say. Yet, in the event that nothing else works, attempt it and be arranged to work quick on the grounds that heated water refreezes rapidly.
  • Spread different locks influenced by freezing climate. for example. latches on sheds or entryways.